Recent Mold Remediation Posts

Preventing and Controlling Mold Growth in Home

3/5/2019 (Permalink)

Mold Remediation Preventing and Controlling Mold Growth in Home Prevention is the best way to avoid large-scale mold damage in your home.

Preventing And Controlling Mold Growth In Home

Mold exists everywhere. It's in the air, in the soil, and on surfaces you touch every day. When you walk into your home, you're almost certainly carrying new spores into the house. Although molds have existed on earth for millions of years, you probably don't want to encourage their growth in your own home. Naturally, you'll worry about cleaning up water damage, but for the best protection, you need to know where it's likely to develop into colonies, how to prevent mold growth, and how to treat existing colonies.

Identification

Any moist, warm corner could be home for a new colony of mold. You may be vigilant about cleaning up spills but unaware of the mold growing under the bathroom sink. Some other common hiding spots include the following:

  • Lint traps and drip trays
  • Chimneys
  • Air conditioners
  • Under laminate flooring

A burst pipe in the basement attracts a lot of attention and cleanup, but a sweaty concrete crawlspace is as susceptible to water damage and the growth of mold.

Prevention

Fortunately, there are some straightforward mold prevention steps you can take without too much time and effort:

  • Reducing levels of humidity
  • Fixing leaky windows, pipes, and roofs
  • Cleaning and drying any area affected by moisture
  • Increasing ventilation in vulnerable rooms, such as the laundry and bathroom

Prevention is the best way to avoid large-scale mold damage in your home.

Treatment

When you do find mold growth in the home, you have two choices to resolve the problem. You can either clean it up yourself or you can contact mold remediation professionals. According to the CDC, if the affected area is less than ten square feet and if you cannot smell the mold, you can do the cleanup yourself. Otherwise, you should contact professionals.

Remember to reduce humidity, check out-of-the-way spots, and complete routine home maintenance to protect your Chesterfield, MO home and family from mold and water damage. Your work today could prevent expensive repairs tomorrow.

Managing and Preventing Mold Growth in Your Home

1/21/2019 (Permalink)

Mold Remediation Managing and Preventing Mold Growth in Your Home Mold after water loss on a bathroom in Chesterfield, MO

When your home in Chesterfield, MO is damaged by water, it’s often necessary to restore areas of your home. Unfortunately, mold is an issue that commonly occurs in conjunction with water damage. However, learning more about mold can help you take steps toward mold prevention.

What Are Common Causes of Mold in Homes?

Mold can grow in various environments and can be caused by a myriad of issues. However, there are several common reasons mold tends to grow in homes, including:

  • High levels of humidity, especially in kitchens or bathrooms
  • Leaks from pipes or other appliances
  • Access to organic materials, such as wood, cloth and other items that mold uses for nutrients

How Is Mold Removed?

Removing every spore of mold is impossible due to the size of the spores, and it’s actually not necessary to have each spore of mold removed for your home to be safe. However, the process of mold remediation brings the mold spores down to a safe level. There are often specific steps taken in the remediation process, which may include:

  • Eliminating the source of the water to prevent more water damage from occurring
  • Removing materials that are badly damaged by either water or mold growth
  • The use of air filtration devices
  • Specialized treatments for affected areas

How Can You Prevent Mold from Growing?

Even though it isn’t always possible to prevent mold from growing, there are some steps you can take to decrease the chance of mold growing in your home, including:

  • Quickly removing any standing water in the home
  • Preventing any leaks by doing frequent maintenance on appliances and pipes
  • Making sure the humidity levels in the home do not get too high

Knowing more about how mold grows and how it can be removed can make prevention easier. If your home has experienced mold growth due to water damage, some people find it helpful to receive assistance from mold remediation experts.

What to Do When Mold is Discovered in a Home

12/26/2018 (Permalink)

Mildew needs a damp environment to grow. When water damage occurs because of leaks, floods, or even high humidity, this detrimental fungus can fester. When growth becomes a problem, it can ruin a St. Louis, MO, home or business.

There are steps that should be taken immediately to address a fungal and mildew problem. However, to guarantee the situation is corrected properly, an environmental hygienist's expertise should be consulted. Here are some things to do when mold is discovered in a home.

Stop the Source of Water

There are thousands of known species of microbial growth and they all need moisture. The first step in fixing the problem is stopping the source of moisture. If a flood caused the water damage, then a professional water restoration company needs to be brought in to assess the damage. They will have the equipment and expertise to remove all the water and dampness.

When the problem is caused by a roof leak, bring in a restoration specialist to get the damaged areas dried out, plus get a roof contractor assessment of how to prevent future leaks. Water line and sewer damage also need to have the moisture professionally removed, but the source of water can be shut off in these situations.

First objective when dampness or unusual water buildup is detected is to stop the source of water immediately. After shutting off the source, consult with a water damage restoration specialist to completely dry out the area.

Growth Has Started

Even if the water source is shut off and the area dried out, microbial growth may not have immediately started. If the growth is minimal, once the moisture source is removed it will not be able to continue growing. That is why securing the services of a competent restoration tech is so vital.

If a fungal growth has already started, some steps can be taken to retard the spread of these bacteria. The expert opinion of an environmental hygienist is highly recommended, but before that consultation, the air where the growth is present needs to be moved around. Use fans to remove dampness in attics or basements, and open the doors under cabinets for sink leaks.

Again, flood damage in Missouri is a very serious problem and must be attended to immediately. There are other pollutants involved when floodwaters are the source of water damage and they act like a catalyst for microbial growth.

There is usually little margin for error when flooding has occurred. The drying process needs to be started immediately and the project should be turned over to an expert in the field.

Testing for Mold Cleanup

12/26/2018 (Permalink)

Even if there are no visible signs of a fungus issue, a home that has experienced some type of water damage should be periodically tested. While mustiness is not always a guarantee there is a problem, it is a sign that professional testing is needed.

Make sure that a reputable testing agency is consulted.

There are scammers who will provide inaccurate results just to get secure a contract for an unnecessary repair job. Trust only environmental hygienists who have a solid reputation. Consult with your Missouri Better Business Bureau, plus research reviews from other customers.

If the tests come back indicating there is a problem, no time should be wasted in setting up an appointment to determine how to begin removal. Often the Missouri based agency that does the testing will have a highly skilled team of experts that can handle the job. Once an issue has been discovered, the next step is to obtain an estimate for removal.

Severe Issues

The testing agency will indicate if the growth problem has escalated to where people occupying the home or building could be at risk. If it is a place of business, all employees must be made aware that there is a problem with mold and mildew present.

Individuals who have respiratory ailments may not be able to safely work in the environment until the problem is fixed. That is why timing is essential if a fungus issue is detected so that the remediation process can be started.

Preventing water damage and unnecessary moisture is the first objective in preventing growth problems. When it is evident that a problem has started, getting a professional test and assessment is important to establish the next step. If mold cleanup is determined to be necessary, consult with a licensed remediation expert in the St. Louis, MO area to get the job done right. Visit http://www.SERVPROnorthweststlouiscounty.com for more information on mold remediation.

What to Do With a Moldy Crawlspace

9/27/2018 (Permalink)

Mold Remediation What to Do With a Moldy Crawlspace Mold growth on wall in a Maryland Heights, MO home

If you recently experienced flooding in your Maryland Heights, MO, home, you may be unhappily surprised to find that your crawlspace or another hard-to-reach area has sustained some mold growth. However, it is important to not get discouraged; mold soda blasting from a reputable mold damage company can usually clear up the mess and get your space back in great shape. Read on to learn all about blasting mold.

What Is Mold Soda Blasting?

Mold soda blasting is an abrasive process that uses baking soda and compressed air in a pressurized spray that eliminates moldy areas from your damp places. Baking soda is an extremely effective cleaner, and the blasting method is extremely fast compared to more traditional cleaning methods. It is also environmentally friendly, as harsh chemicals are not required.

Steps in the Blasting Process

If you are now curious to see how the blasting technique works, take a look at these three easy steps that are involved:

  1. Inspection, when professionals analyze the wetness damage to figure out what can be done to clean out the mold that has grown
  2. Blasting, where the actual baking soda blast discussed above takes place
  3. Cleaning, which includes using a vacuum and wiping down any dirt and debris left over from blasting

Once the whole procedure is completed, your crawlspace or area under your house will likely seem good as new. You might forget you ever had a moisture problem after a while!

Don’t Worry – Just Seek Help

It is understandably easy to get upset when you find mold in your crawlspace or another section of your residential building, and it can be discouraging to not know where to turn. Trust that the right mold cleanup technicians know what’s best for you and your home, and talk to your local specialists about the possibility of using mold soda blasting to restore and preserve your household property.

The Art of Performing Successful Mold Removal

8/28/2018 (Permalink)

The Art of Performing Successful Mold Removal

For years now, mold has been used in wine and cheese production. It's also useful in the medication field as it's used to produce penicillin and other drugs. Like any other organism, mold is essential to the natural environment. It helps balance the ecosystem in one way or another. But this doesn't mean that it's good to have mold in homes. Mold damage can cost homeowners a lot of time, effort, and energy.

When most people hear about mold, the term "mildew" also comes to their mind. These fungi share some similarities. They both grow in moist warm areas and have a smelly odor. So they require deodorization during remediation. However, mold is different to mildew in terms of texture, size, and color.

Mildew is easy to treat with a scrubbing brush and a surface cleaner. What's more, it's easily identifiable because it is forms gray patches. Conversely, mold can either be green on black, depending on the species. Unlike mildew, it can cover large areas, and it's difficult to destroy using basic mitigation methods. With the right tools, anyone can eliminate mold. But sometimes the mold removal process gets tough. In instances like this, one may need to hire reputable companies that deal with commercial mold damage.

It's advisable to apply the right mitigation measures to ensure that mold damage doesn't ruin property. Homeowners can choose to carry out mold removal themselves or hire a remediation expert. Either way, the process will still cost money and time. However, this is the only option to get rid of mold in homes. The following are a few things everyone should know about the mold removal and deodorization.

In cases of commercial mold damage, it's advisable to hire a mold removal company. These companies know the best mitigation measures to take. Additionally, they can easily determine the type of fungus. This is important as it helps them ensure the remediation process is effective. Mold in homes can cause different levels of mold damage. Bathrooms are most susceptible to mold damage. The fungus causes discoloration to bathroom tiles.

Seeing molds in homes, especially on walls and ceilings, is a disgusting sight. Additionally, the smelly odor from the fungus can cause a lot of discomfort to the dwellers. Most people who don't know about mold remediation opt to replace tiles and paint damaged surfaces. To get rid of the smelly odor, it's recommendable to undertake deodorization.

After determining who will remove the mold, the next step should be to inspect the affected area. Mold can grow anywhere, so it would be wise to check under tiles, rugs, and floorboards. Consider checking between cracks too. The person taking care of the mold and the smelly odor needs to ensure no surface is left unchecked.

Next, the commercial mold damage and remediation specialist should work toward neutralizing the fungus. This is one of the most mitigation measures. If the specialist doesn’t neutralize the mold, the spores may spread to the other parts of the house. This will cause more problems as it will lead to further growth. The most common tools used to contain mold are duct tape and plastic sheets. The spores should then be eliminated using an air-filtration system to make the air safe to breathe.

The last step is to begin the actual removal process. When dealing with commercial mold damage, specialists use a special cleaning agent to scrub non-porous surfaces such as plastic and glass. One should be careful when cleaning porous surfaces. The best solution for porous materials is to replace them. Although will cost the homeowner money, it will help him/her save a lot of time and money in the long run.

So, it’s important to seek the assistance of experienced mold removal technicians. They know the best mold remediation and deodorization techniques. When dealing with mold in homes, it's advisable to use high-quality mold removal products. Visit http://www.SERVPROnorthweststlouiscounty.com for more information on mold remediation.

You’ll Find Mold in These Six Surprising Places

5/10/2018 (Permalink)

Mold Remediation You’ll Find Mold in These Six Surprising Places Give SERVPRO a call if you notice mold growing in your home.

You may think you’ve ferreted out all the mold in your St Louis, MO residence, but the odds are you don’t even know all the places to start looking for mold growth in your home. Mold isn’t just a surface issue; did you know if you have mold on your walls, it’s likely you also have mold behind your walls as well? And not just there. Let’s take a look at six places where you might find mold, as long as you know where to look.

1. Behind your walls. Moldy drywall can leave your entire house smelling musty and can let mold spread unchecked and out of sight.
2. Underneath your carpeting. If moisture gets trapped under your carpet, it’s a perfect space for mold to grow – enclosed, dark, with pockets of wetness for it to feed on. It will also feed on organic matter such as carpet glue and carpet fiber.
3. Inside the wood of your floors. Because mold feeds on organic matter, older wood floors can be ripe for this. Mold on wood happens when wood gets old and begins to soften with frequent water absorption.
4. Under sinks. Drips and leaks can slowly accumulate under sinks until you don’t even think to check in this out-of-the-way place when mold growth can be slow – but once it starts, it’s hard to get rid of.
5. Underneath laminate flooring. Laminate flooring has many of the same problems as carpeting, and once moisture is trapped underneath, mold will happily devour the glue on the laminate.
6. Inside your appliances. Refrigerators and air conditioners are the worst culprits when they can often accumulate condensation that feeds mold. Any appliance that attracts condensation can grow mold, though.

Sometimes, you may not be able to identify mold growth in small spaces or have the tools to check for mold underneath flooring. That’s when a mold remediation specialist can come in handy – to help you get your mold problem under control. Visit http://www.SERVPROnorthweststlouiscounty.com for more information on mold

3 Reasons Your Ceiling Tiles Are Discolored

4/30/2018 (Permalink)

Mold Remediation 3 Reasons Your Ceiling Tiles Are Discolored Give SERVPRO a call if you notice mold in your home or business.

When ceiling tiles age, they can lose their original color. As dust accumulates or color fades from exposure to UV light, tiles can begin to look different. Fortunately, the change is usually uniform across all tiles, so it isn’t noticeable. A bigger issue is tile discoloration that stands out from the rest of the ceiling. More often than not, it’s a result of water saturating the tile.

You may want to replace the discolored tiles, but before you do, it’s critical to eliminate the source of the problem. Excess water can weaken building materials and cause the growth of tile mold, requiring a water damage mitigation expert in St. Louis, MO to handle the cleanup. Before you try to replace or clean the affected ceiling area, check to see if one of these issues is causing the problem.

1. Your building is leaking.

If the discolored ceiling is on your building’s top floor, you could be looking at a leak in your roof. If the stain is concentrated next to an outside wall, it could be a leak in the outer wall. Bring in your contractor to see if he or she can locate the source of the leak and make repairs. If you find tile mold or excessive moisture in your attic or wall, call in an expert to remove the moldy materials and dry the area out completely.

2. Water is condensing.

Uninsulated air vents can cause condensation that drips down and seeps into ceiling tiles. Likewise, any place where steam rises can create condensation on the ceiling, leading to stains. Look carefully at the location of the discoloration to see if it’s in close proximity to vents, radiators, stovetops or other likely culprits.

3. There’s a plumbing problem.

A pipe or plumbing fixture located over the ceiling may be leaking. An experienced plumber should be able to locate the leak and make repairs. Plumbing leaks can quickly lead to tile mold, but don’t attempt to clean it yourself. A mitigation expert in St. Louis, MO will know how to do the mold cleanup quickly and efficiently so you can get your new ceiling tiles installed in no time. Visit http://www.SERVPROnorthweststlouiscounty.com for more information on mold. 

How Do I Get Rid of Mold Odor in My Home?

3/26/2018 (Permalink)

A musty odor in a basement or bathroom typically comes from breeding fungi that produce a smell caused by mycotoxins. That is probably what you smell when you notice the mildew odor in your home, on your clothes, or inside your automobile. A mycotoxin is a type of yeast produced by the reproduction process of various mold compounds. To get rid of the mold and its odor, you need to understand what it is and how it grows.

Mold Facts

Mold is a common fungus, but most people know very little about it. Here are some interesting facts about residential mold:

" Mold is a type of bacteria.
" It is a thread-like organism created by thousands of cells.
" It requires moisture to grow.
" It grows in a variety of colors.
" Mold can be detected by smell, even when not visible.
" Each organism can release spores into the air that float unseen.
" A mold spore can grow on almost any natural surface.
" There are five different types of mycotoxin, so not all musty, mildew smells are the same.

Musty Odor

Mold likes to hide between pieces of wood, in damp cracks, and under appliances. Since mildew can easily grow in humid weather, or in moist laundry rooms, it may be very difficult to eliminate. Using boiled lemon peels or a box of baking soda to remove the damp smell can help initially, but removing the yeasty odor is not the same as getting rid of the mold.

Safe Remediation

Consider calling a mold remediation team in St. Louis, MO when you discover mildew or fungi odors. The experts can answer all your questions about safe and effective mold removal. The professionals can also provide advice about ventilation, disinfectants, and colony elimination to permanently alleviate the odor. Specially designed HEPA air filtration devices can be especially effective in removing musty odor caused by mycotoxin growth once the mold is gone, and the team can help you find one that fills your needs. Visit http://www.SERVPROnorthweststlouiscounty.com for more information on mold. 

The Secret Behind Mold Odor, Explained (and What To Do About It)

2/21/2018 (Permalink)

Most people are aware that mold has an odor, as the smell is very distinctive. Ask anyone and they’re bound to tell you that mold smells musty and stagnant, like a pool of water that has been allowed to sit and accumulate fallen leaves, mosquito larvae and other filth. However, though most people may be able to describe that musty odor in detail, not many people can tell you why mold smells. A mold remediation team in Maryland Heights, MO however, can. Mold smells the way it does because of mycotoxin and the following other compounds:

• Geosmin, which smells earthy, like the scent after it rains
• 1-octen-3-ol, which has been described as smelling “moldy” or meaty
• Borneol, which smells like camphor
• 1-butanol, which has a smell like alcohol fermenting
• 2-hexanone, which smells like acetone
• 3-octanone, which has a nutty or fatty odor

Each of these compounds contribute to the overall musty odor of mold, but the quantities vary. Though these chemicals can be toxic in large quantities, the amounts produced and released by mold are too small to be of any harm.

What Is Mycotoxin?

This compound is by far the greatest contributor to the musty smell that accompanies mold. Mycotoxins are toxic chemicals released by funguses that, in large quantities, are capable of causing disease in both humans and animals. However, the mycotoxins of many molds are generally harmless. Where circumstances are right, the level of mycotoxins can become high, though it is not quite clear why this is, as they are not necessary for the production of fungi. One theory of why they are present where there’s mold is that they effectively deteriorate materials, thereby creating a better environment for fungi development.

Most mycotoxins produce pungent odors, with the most common descriptors including:

• Cat urine
• Grease
• Mustiness
• Earthiness
• Old cheese
• Wet dog
• Acridity

If you smell a strong, pungent odor that you believe to be mold, reach out to your Maryland Heights, MO mold remediation team right away. The sooner you resolve the problem, the better off you’ll be.
Visit http://www.SERVPROnorthweststlouiscounty.com for more information on mold.

Why Does Mold Smell?

12/15/2017 (Permalink)

Why Does Mold Smell?

Many people are familiar with the musty odor of mildew or mold, but fewer are aware of what actually gives mold its characteristic stench. Mold releases strongly-scented microbial volatile organic compounds into the air and mycotoxin is the source of the odor. You can remedy the growth and smell of mold by hiring experts in St. Louis, Missouri who specialize in clean-up and mold remediation.

Does the Smell of Mold Indicate Its Presence?

A moldy smell can indicate that an environment is ripe for mold growth, at the very least, or perhaps that mold is already growing. Other warning signs include evidence of:

Water leaks and damage
Mildew (early stage mold)
Mold growth

Even if you cannot see evidence of mold out in the open, you are not necessarily in the clear. Mold can grow under carpets or behind wallpaper. Avoid hunting for the source of a moldy smell on your own, as disturbing a colony may release spores into the air.

Should You Contact An Expert if You Smell Mold?

It is generally better to be certain and safe than uncertain and sorry. A musty odor resulting from mycotoxin can be a warning sign that immediate measures should be taken to prevent mold from turning into a serious problem. When you hire experts, you don’t run as big of a risk of misidentification or failed attempts to locate, clean, and remediate mold.

What Can You Do About Mold Smells?

Other than having your home or commercial property professionally cleaned and remediated by experts specializing in treating mold, you might also consider running an air filtration device with HEPA technology.

If your home or commercial property has developed a musty odor, you may want to have indoor environmental specialists in St. Louis, Missouri test the structure. They can determine whether mycotoxin or other evidence of mold is present and whether clean-up and mold remediation are needed. Visit http://www.SERVPROnorthweststlouiscounty.com for more information on mold.

Eradicating Mold Growth in the Home

8/28/2017 (Permalink)


Eradicating Mold Growth in the Home

As home and business owners, the livability and workability of these structures can be affected and altered in damaging and often unexpected ways. One of the most common ways in which our most intimate structures can be affected is when mold is found to exist in the home. Mold damage is very common, but it can be so problematic because of the areas that it can affect, and the rate in which the fungus and mildew can increase. Mold damage can occur in any area where moisture is allowed to accumulate unchecked. Mold in the home can often come in the forms of fungus, mildew, and black mold. If there is a fungus, mildew, or black mold buildup, commercial mold damage treatment should be sought out, as disturbing these spores can result in increased damage throughout the facility, lessening the chances for damage mitigation. When dealing with mold damage, specifically black mold, fungus, and mildew, the first step to take is to contact your insurance company.

When contacting your insurance company in regards to mold removal and remediation, it is important to detail the specific circumstances of the incident that you are facing. When detailing the incident, issues such as black mold, the level of mold growth, mold damage, smelly odor, dry rot, and suspected mold growth behind a wall, should all be listed in order to slow down the damaging aspects and increase the chances for mitigation. In the mold removal and remediation process, after the insurance company has been contacted, you should seek a restoration company that can possibly assess and remedy your needs. The insurance company should be able to recommend a restoration company that can take care of your situation, but individual research should always be done when assessing commercial mold damage, as each restoration company may be better equipped to handle a specific set of circumstances. When dealing with mold damage, mold removal, and remediation, consider your circumstances, as a restoration company must be licensed by the state to take on repairs that go beyond mold growth. Your insurance company, as well as the restoration company you hire to complete the mold damage remediation, work for you and the situation should be treated as such. In order to make sure that you are receiving the services that you pay for, it is necessary to understand the responsibilities of each party, including yourself. The mold remediation process is wrapped up once deodorization is completed.

When working with the company that you’ve chosen for commercial mold damage restoration, it is important to understand how mold in the home is created, how it grows, and how it is prevented to ensure mitigation. Many times, mold in the home is not immediately recognizable. On these occasions, mold in the home can be identified by a smelly odor, signaling that deodorization is necessary. When there is a smelly odor, but the mold in the home is not immediately recognizable, it is possible that there is mold growth behind a wall or another barrier. Mold growth behind a wall can lead to a myriad of problems due to the fact that it may have been left unchecked for a long period of time. When there is mold growth behind a wall, it may be due to a leaking or damaged drain pipe, in which case the barrier may need to be removed. It is important to understand whether your restoration company is equipped and licensed to knock down and repair a wall that hides suspected mold growth when mitigation is a priority.

A smelly odor may be a sign of dry rot, which could lead to structural damage and increased costs, or a completely unlivable environment. Dry rot is a very common occurrence when moisture and mold growth are allowed to go unchecked. This can occur when the black mold isn’t recognized and checked in a timely manner. During the mold removal process, after dry rot is ruled out or treated, the deodorization process will begin. Deodorization should be completed by professionals, as many of the commercial products available may only mask the odor. When deodorization isn’t performed in the proper manner, it can become an ongoing issue.
Visit http://www.SERVPROnorthweststlouiscounty.com for more information on mold.

Steps in Professional Mold Remediation

7/26/2017 (Permalink)


Steps in Professional Mold Remediation

Mold is a fungus that grows in forms of multi-cellular, and they may live in indoors or outdoors and do well in damp, warm, and humid environments. Although shower stalls and basements are typically moist and dump areas are more prone to the growth of molds,
Mold growth can also take place on Dry Rot(wood decay caused by species of fungi) forming a mildew {whitish coating} since it supports the growth of molds including black mold.
There are several conditions for mold growth they include:
• Available molds spores.
• Available mold food.
• Appropriate temperature.
• Favorable moisture.


Common household molds have a characteristic of which they get identified with “musty” or “earthy” smelly odor. Although most mold colonies appear greenish to black [ typical of mold growing on bathroom floor} in color, the characteristics of mold growth behind walls covering buildings result in pinkish to yellowish staining of the wall covering.
Black mold fungus can spread throughout the property and produce allergens and irritants that have health effects to humans and create irritants effect; they can danger to the health human kind. Deodorization is therefore carried out to neutralize the effects of black mold growth can also, leave an odor in your home primarily a musty, unpleasant, smelly odor throughout your home. Commercial mold damage may lead to the destruction of equipment, lead to food poisoning and increase maintenance costs.

Mold Remediation

Mold remediation is the practices that help to minimize the growth of mold in home or business located in hot, humid climate.

The process includes:

Step 1: Inspection and Mold Damage Assessment.
These include a proper inspection of your property for any visible signs of black molds those from household materials and equipment’s, walls, commercial mold damage, mold growth behind walls and hidden plain view. Make preliminary assessment during mold remediation, and an evaluation of mold remediation. Mold damage assessments should also be done.

Step 2: Mold in Home Containment.
These explain control, mold removal, prevention of cross contamination and spread of mold from contaminated area to areas that are not invaded by the mildew or within less contamination.
Several procedures may be employed that use advanced containment procedures which include deodorization to remove the smelly odor, negative air chambers towards the isolation of the contaminated areas with physical barriers and negative air pressure which prevent the mold spores from distributing during the cleanup process
All home fans, heating, and cooling systems may be turned off to avoid the spread of mold.

Step 3: Getting rid of mold and mold infested materials and equipment.
The mold in homes and commercial mold damage remediation and mitigation process depends on the amount of mold/fungus growth and types of surface or dry rot on which mold appears; it may also include the area in which the mold growth has taken place.
Antifungal and antimicrobial treatment methods are used to eliminate mildew colonies from forming. Removing and disposing of mold infested porous materials like dry rot and carpeting may be necessary to remediate heavy mold growth.

Step 4: Source removal.
The process involves physical mold removal from its sources, either those that have taken place in the walls or the hidden plain view. The mold in home mitigation includes deodorization, cleaning the furniture, decorative items, disposing of dry rot, curtains, and restorable items affected by fungus/ mildew. Mitigating commercial mold damage requires cleaning in areas where machinery is placed. One must be extremely careful when engaging in the process of mold removal and mitigation.
The mitigation process involves generally:
•Getting rid of water-damaged, mold-infested materials so as to prevent cross contamination of the black mold spores.
•Cleaning and disinfection of walls (mold growth behind walls), rugs, and personal home items.
•Removal of drywalls and studs if the mold damage is very extensive.
•Vacuuming with HEPA (high-efficiency particulate air) filtration by a restoration company.
•Deodorization.


Step 5: Moisture removal and Air filtration by a restoration company
The process involves using specialized techniques to capture microscopic mold spores and the smelly odor, by use of air scrubbers and restoration company HEPA approved vacuums towards the prevention the spread of these mold spores while the mold removal is in the process.

Step 6: Restoration
It depends on the level of mold damage, mold growth behind walls, drywall, subfloors and other building materials may be removed. It involves minor repair and major repairs.
Restoration company performs other activities which may include replacing drywall, painting and installing new equipment's also the reconstruction of various rooms in a home or business.
Visit http://www.SERVPROnorthweststlouiscounty.com for more information on mold.

How to Handle Mold Removal and Remediation in Your Home or Business

6/26/2017 (Permalink)


How to Handle Mold Removal and Remediation in Your Home or Business

Mold damage is one of the most common problems in households throughout the world. Mold damage can be a result of leaking pipes, excessive water use and other water-related or condensation-related problems in the house or office. Mildew and mold are the same thing, so even if you think mildew is innocent enough, it's important to realize that it's still a dangerous fungus that shouldn't be left to fester behind walls and flooring. Expert remediation and mitigation services are often necessary to get rid of a severe fungus problem.

Why Mold Damage is So Problematic

Mold damage can be so problematic because it affects a wide variety of different household items. If it's left to fester in the home, you'll probably have to throw away flooring, insulation and sheet rock in order to replace the materials with brand new products. Remediation and mitigation gets rid of these issues so that you're able to reclaim your home or office and no longer have to deal with the fungus problem. Professionals can even work with commercial mold damage, ensuring that your business is a safe haven for clients and employees.

Choosing Professional Mildew Remediation and Mitigation

While a lot of people might attempt to clean up the fungus on their own, it's crucial to understand how beneficial the professionals can be with this particular issue. The experts use all of their own deodorization techniques, which clears the air of any floating spores and gets rid of the smelly odor associated with fungus. Mold in your home can be annoying and problematic to live around and breathe on a regular basis, so having mold removal done on a professional level is beneficial in more ways than one. These deodorization techniques eliminate the smelly odor completely, and this is something you simply wouldn't be able to do on your own.

How Mildew Mitigation Companies Work to Handle Commercial Mold Damage

If you've recently dealt with mold in the home, you need to consider expert mold removal services. The mold removal experts will come to your home and assess the damage before giving you a price for the project. Once you've accepted this amount, they'll get to work removing the mold in the home and using specialty deodorization techniques to clear the air of the smelly odor and lingering mold spores. Commercial mold damage cleanup is ideal for businesses, as these companies are able to come to your office during off-hours.

Costs of Remediation Services

The cost of dealing with mold in your home or business can be quite high, especially if you do not have any type of insurance. Commercial mold damage and deodorization can be paid for if you have property insurance that covers this type of work. Before you pay to have the remediation done, be sure to contact your insurance agent to see if the costs are covered for you. From there, you'll have your pick of removal company and won't need to worry that the job is costing you an arm and a leg.

Mold Removal Guarantees

Mold removal experts often put guarantees on their work to prevent you from experiencing the smelly odor and fungal regrowth in the future. If you notice that the mold is growing back or you experience a pungent odor, you just need to contact the company in question and they will come back to your home and finish the cleaning. In many cases, the company will need to make multiple trips to your home to ensure that the mildew has been cleaned properly and that there is no chance of regrowth. Despite the fact that it's tempting to try to handle a mold problem on your own, it's important to realize that it isn't always the smartest choice to try to rectify the issue yourself and that an expert company is better equipped to handle the fungus.
Visit http://www.SERVPROnorthweststlouiscounty.com for for more information on mold removal and remediation.

St. Louis Mold Remediation

3/24/2017 (Permalink)

St. Louis Mold Remediation


Getting Rid of Mold in the St. Louis Area

When a homeowner needs to be sure that they are able to get rid of mold inside of their home, it pays to get in touch with mold rendition experts that can help. There are plenty of companies that offer this sort of work, but it is critical that a person learns as much as they can to get the best service possible. There are a lot of different companies in this area who will gladly provide the assistance that homeowners need most. In this regard, these tips below will explain the benefits of leaning on one of these environmental hygienists in St. Louis, Missouri, in order to keep the home free of mildew and fungus issues.

What are the benefits of hiring a microbial growth contractor?

Before making any kind of hire, it is best to take a glimpse of these benefits below in see why hiring a remediation professional is so advantageous.

#1: These professionals have access to the necessary tools for mold cleanup service

One of the main benefits to getting in touch these professionals is that they have all of the equipment that is useful in quickly and effectively re mediating any bacterial growth issues. Problems tend to spread quickly in areas of dampness and moisture, so it pays to get in touch with contractors who have the equipment to get the most thorough and in-depth inspection. Bacterial growth can hide in hard-to-reach places, so hiring the right professional is a must.


#2: They will get rid of mildew and keep property values high

When this bacterial growth is allowed to get out of hand, it becomes difficult to retain property values. It will break down structure and make it weaker over time. Conversely, getting in touch with the right contractor will make sure that property values remain high and that crises are averted.

How can a person hire the right microbial growth contractor?

In order to be sure that the best work is taken in order to get rid of bacterial growth, it pays to get in touch with a professional environmental hygienist. Before doing this, a person must understand what they should do to get the best service from a company that understands how to handle this sort of work. These tips below will make it easy and will ensure that a homeowner finds the best person or company for the job.

#1: Research the record and background of the Missouri mold cleanup company

Before making a hire, it is very important to look into the company's track record. There are a plethora of companies in the MO area that provide these services, so some serious work must be done in the planning process. This is done by checking the Better Business Bureau, state licensing board and other organizations. Understanding their track record provides people with the opportunity to get all that they can out of remediation service.

#2: Ask contractors for in MO for estimates on the work that they offer

No matter what sort of work is required, it is very important to find out the market rate for these services. To do this, a person would need to begin taking bids on how much this service might cost. Homeowners should get at least five different estimates to make sure that they have truly done their due diligence in finding the right price. This lets people know that they are spending their money as wisely as possible and getting the best deal.

#3: Find out their fungus remediation tools and methods

It is very important to our exactly how each company handles remediation tasks. Get a clear understanding of their equipment and whenever possible, do business with a contractor that focuses on the most eco-friendly methods. This way, the work will be done quickly and cleanly without utilizing harsh chemicals that can have other ramifications. By doing business with a company that uses the best methods, a homeowner will be in good hands and able to make the most use of such an emergency.

With these tips in mind, a homeowner will be in good hands getting rid of bacterial growth. Visit http://www.SERVPROnorthweststlouiscounty.com for more information on mold removal and remediation.